ManCage Chastity Cage, Number 01, Transparent

Product Information

Our team of working at height experts are ready to discuss your specific needs and provide the right solutions - helping you reduce risk, remain compliant and staying safe when working at height. A triangular ring (not round like the other cages) to fully adopt the appearance of the male scrotum and help bring the cage over a long period. No user shall require or permit any person to be moved or supported through a lifting machine. Unless that machine is fitted with a man-cage designed. It should be manufactured according to an approved SANS standard approved for that purpose by an inspector and after a risk assessment has been done. 3 Requirements: Crane man cages are used specifically for cranes, even though they can be transported by a forklift.

People in the working platform should not stand on the guardrails orlean out of the platform when it is elevated. In cases when people need to lean out of the platform to do work, ensure they wear appropriate personal protective equipment (PPE), which typically consists of a full body harness with lanyard attached to a suitable anchor point. When planning an activity that involves any aspect of working at height, it is vital to consider the safe method of getting a person to the area in which they need to work. All persons involved with work platforms should be properly trained, including action to be taken in the event of an emergency Communication: Manufacturers must indicate clearly, by markings on the equipment and within the instructions, if the lifting machinery is intended for lifting people. Use of lifting equipment for lifting people Under the Health and Safety at Work etc Act 1974 employers or people who have control of premises have the duty to ensure the safety of their employees and other people on the premises.Man cages create a safe elevated workspace, they are also known as: man box, forklift cage, man carrying cage, man safety cage, man workbox, workbox, crane workbox, forklift workbox and there are even a few other less common names used to refer to a man cage. The use of non-integrated platforms for planned work is not allowed as there is other purpose-built access equipment, such as the wide variety of mobile elevating work platforms (MEWPs), which are better suited to carrying out work at height tasks and are safer for the person using the platform. These are readily available for hire. The HSE advice on the use of these clarifies what the law says: There should be an agreed system of hand signals in place that everyone involved is trained in the use of. Man cages are supplied to ensure that personnel can work as efficiently as possible, so the rails are built at half height. Attachment points are available to be used for lanyards and safety lines. Crane man cages need to be erected by chain and will have chain attachments on each corner of the cage /box.

Non-integrated work platformsdo not fall under the Machinery Directive in which a machine is described as“an assembly, fitted with or intended to be fitted with a drive system other than directly applied human or animal effort, consisting of linked parts or components, at least one of which moves, and which are joined together for a specific application.” Therefore, forklift cages must not be CE marked and there is no free movement of their distribution throughout the EU.

Get Free Working at Height Advice

Our aim is to offer high quality products at affordable prices with discreet worldwide delivery. Many chastity belts that we've seen on the market are incredibly expensive and we don't think that's particularly fair, so we do our best to offer the best devices for the lowest prices. All of our products are thoroughly tested to ensure that you receive a safe, quality item that you’re happy to use on a regular basis. According to the Management of Health and Safety at Work Regulations 1999 a risk assessment must be carried out before any work at height is done. Non-integrated work platforms can only be used under the exception in the Use of Work Equipment Directive (AUWED 89/655/EC amnded by 95/63/EC) that allows the use of material handling equipment not designed to lift people in exceptional circumstances. Under the Work at Height Regulations 2005 (WAHR) all work at height must be properly planned, organised and the risks controlled. No assembly between the cage and the ring for comfort and safety. No risk of pinching the skin in an assembly of several elements.

The selection and use of an appropriate and suitable method of access will depend on the nature of the task to be carried out, the frequency of occurrence, the duration of the work and the availability of equipment. When issuing a Declaration of Conformity for lifting equipment, manufacturers have to assess its design and construction against these requirements, undertaking inspection, examination and testing as necessary to meet them, as well as meeting industry-accepted quality and safety standards. The Declaration of Conformity may therefore be a substitute for the initial thorough examination before first use, if the lifting equipment does not depend on post-manufacture assembly or installation conditions. Forklift man cages can only be used on a forklift and cannot be carried to extreme heights as a crane man cage can.

Share with your friend

There is a wide varietyof equipment available for work at height, including fixed scaffolding, tower scaffolds, mobile elevating work platforms (MEWPs), portable ladders, as well as non-integrated work platforms, or man-baskets. While the use of the latter is acceptable in veryspecific circumstances, it is not usually recommended. In this article we will outline what is a non-integrated work platform, how to work safely with it, and when it's not acceptable to use it as means to access height. The area below the work at height must be segregated from the normal work activity via the use of warning cones, lights, barriers or signs as appropriate. This patented sheath, with its unique design, is produced using materials used in medical surgery, making it fully hypoallergenic, while its shape is perfectly suited to the male physique. The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) requires that lifting operations are properly planned and work is carried out in a safe manner.

People can be at greater risk of harm when they are lifted by machinery (eg operators of mobile elevated work platforms may collide with overhead structures and mobile access equipment may be at higher risk of overturning, potentially resulting in serious or fatal injuries). The increased risks for lifting equipment require greater levels of safety in their: All relevant LOLER requirements must be followed for the use of both non-integrated and integrated work platforms. When deciding to use a non-integrated or integrated work platform, employers must follow the relevant requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER). Our toolbox talk discusses the topic of the safe use of a man-cage. The safe use of a man-cage is important as it is classified as working at heights, which is seen as a high risk activity. “Man-Cage” means a platform enclosed on all sides. Whether closed or open at the top, designed to raise and lower persons utilizing a lifting machine, but does not include mobile elevated platforms and suspended access platforms. Regulation 18(8) Mistress Thorne has created this simple guide with images to talk you through each stage of the process. 1. Safety precautionsPM28 also gives further guidance on what 'occasional unplanned use' means. It clearly states that non-integrated platforms should only be used for work, which is 'exceptional'. Exceptional work would include unplanned work such as the changing of a single light bulb as an emergency job.